The finished crane at it's highest point
Over the past week I have been building a camera crane, or jib. For those of you who do not know what a camera crane is, it is a device that allows you to take video from really high in the air to really low in the air. The one I built costs about $25.00, but if you have an old stand and access to a welder and some scrap metal, you could build it for well under $10.00.
The materials required to build it are:
2 2 by 2′s
various bolts
some scrap metal
a stand from an old utility light.
The two 2×2′s are connected to the pivot, camera end and operator end with 1/4” bolts and nuts. This system is simple yet effective. The brackets on the camera and operator side are exactly the same, and are made of thin sheet metal. I spot-welded the metal together at school. The central pivot point is made out of thick steel bar that has been bent into a rectangle. The two ends were mig welded together. If you do not have access to a welder, you could do the same with pop-rivets or screws. The central pivot point connects to the stand with a 1/4” bolt, as that was what the stand would accept. The stand was from an old utility light.
The LCD monitor is just a portable dvd player. I connected the video output of my video camera to the input of the dvd player. This allows me to see what I am doing. Sometimes the sun is too bright to see the screen, so I added a piece of cardboard to help make the screen viewable in direct sunlight.
Here are some pictures:
The finished crane at it's highest point
The finished crane
A close up of the central pivot point
The operator's end
The camera end
A close up of the pivot point on the ends. Both the operator end and camera end use the same bracket.
This is my temporary counterweight. I usually fill it with various heavy objects from around the garage.
Here is a short video that shows it “swooping”:
Thanks for this DIY. Very simple (if one can weld!)
Great site overall, too. You seem to fill the introductory niche often missing in the DIY community. The CNC and this both give people the low-level tools necessary for larger projects.
Keep up the good work.
I’d love to see video you’ve shot with the crane
Great DIY, it’s a very clever idea. Can you post a demo video to show us how it works from the camera end?
Pingback: Build Your Own Camera Crane For Super Steady Video | Lifehacker Australia
Pingback: Tip: Byg din egen kamerakran | Teknofil.dk
Pingback: The Far Edge » Blog Archive » Build Your Own Camera Crane for Super Steady Video [Weekend Project]
Pingback: DIY Camera Crane - Hacked Gadgets - DIY Tech Blog
Pingback: DIY Camera Crane | The Express Art Blog
Pingback: DIY Camera Crane | The Express Art Blog
Pingback: DIY Camera Crane
This will be very handy indeed.
I have been looking at other DIY sites, looking at how to build a steady cam device. The crane is definitely next on the list. I might not need it yet for my next project, but it will for sure come in handy one of these days.
This is super cool.
Pingback: DIY Camera Crane - Tech Penguin
Pingback: Filming Hack – How to Make a DIY Camera Crane!
Cool.
I’m part of Meetup group that is trying to make our own movie. This might come in handy.
I really like your blog and i respect your work. I’ll be a frequent visitor.
I love when others come up with ways to upcycle items and this definitely is the coolest.
If you removed the bottom bolt from the pivot wouldn’t it allow you to tilt the camera?
This is great work. I’d also love to see a sample video as a followup.
This is a great project!
I’m really interested in how you disassembled the videocam to place it on both ends. Can you perhaps give some instructions about that as well?
If you make a slit instead of a hole for one beam at the pivot, then you could tilt the camera.
Pingback: Die Twitter Wochenschau
Pingback: Seven DIY Video Photography Projects For HD-DSLRers and Videographers | Pixel Photography
Pingback: Super simple camera crane for sweeping shots « The tech telecom and all
Pingback: PEDRO GOICO. New Media Developer´s Blog.
Pingback: chromedecay : 16/52: DIY Camera Jib/Crane
Thanks for sharing this!
I just finished building my own, and documented it on my blog. Many thanks for your inspiration!
http://www.chromedecay.org/2010/04/16/1652-diy-camera-jibcrane/
Bill
As a Newbie, I am always searching online for articles that can help me. Thank you
Pingback: camera system
Pingback: Flygels
Interesting article, i am happy to have stumbled across this while searching on google. Absolutely will bookmark.
Pingback: Anonymous
Pingback: Wacky Hacks » Blog Archive » DIY Camera Crane
Pingback: Kamerakran at Angelmadness
Pingback: Bygg en enkel kran – Indieflick
Pingback: 3 camera booms for your Wednesday afternoon - Hack a Day
Pingback: Connecting Bloggers » Blog Archive » 3 camera booms for your Wednesday afternoon
Wow, finally I found a solution for our low budget vidcasts. We have to achieve exactly this effects, but have no budget to rent a camera crane – but this is the proof we can do it – and thanks for the video
!
what camera do you use?
Pingback: How to film this smooth